Lockstate LS-RDJ Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Lockstate LS-RDJ. LOCKSTATE LS-RDJ User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
The LS-RDJ comes standard with the
following features:
1 unique master code
9 unique user codes
Low Battery Alarm
External power capability
Manual override keys
Tamper-proof error function
Easy installation
1. INSTALLATION
1.1 Lock Diagram
Below is a diagram of the LS-RDJ with
numbers indicating areas of function. These
numbers correspond with their description in
the box below:
1.2 Door Diagram
If you are installing the LS-RDJ in a
door with pre-drilled holes, the lock
will fit most standard doors. To
confirm that the lock will fit your door,
please verify the following
measurements:
1. Backset is either 2 3/4” or 2 3/8”
(backset is the measure from the edge of
the door to the center of the knob hole)
2. Door knob hole is 2 1/8”
3. Latch Hole is 7/8”
(see figure below)
1.3 Installing the Batteries
The battery case is located in the lower
half of the outside lock piece.
Remove the battery case by inserting
the small green screw driver through
the bottom hole of the back side of
the front mount (see below). As you
press the screw driver through the
hole the case will release from the
bottom of the mount. Place 4 AA
batteries in the case and replace the
case in the mount.
Fig. 1
1
Handle (Left handle or Right handle)
2
"S" key (setup key) for setting new codes
3
Green light indicating the lock is open
4
Socket for external power (6V)
5
Red light indicating the lock is not open
6
Digital keypad (digits 0-9)
7
"ON" key used for unlocking the lock
8
Emergency manual keys
Vue de la page 0
1 2 3

Résumé du contenu

Page 1

The LS-RDJ comes standard with the following features: • 1 unique master code • 9 unique user codes • Low Battery Alarm • External power capabilit

Page 2

1.4 Installing the Lock Place the latch through the latch hole positioned correctly for latching your door. Leave the latch loose until both the fr

Page 3

2.3 Canceling and Resetting Codes In order to cancel ALL existing user codes, enter the existing master code and then press the “ON” button. After y

Commentaires sur ces manuels

Pas de commentaire